Skip to main content
SHOW DETAILS
up-solid down-solid
eye
Title
Date Archived
Creator
Community Texts
Feb 21, 2023 Rashmi Pancholi, Dr. Santosh Jain
texts

eye 0

favorite 0

comment 0

Cancer, one of the most prevalent causes of death and disease, has a convoluted pathophysiology. Chemotherapy, immunotherapy and radiation therapy are examples of traditional cancer treatments. However, lack of selectivity, restrictions such cytotoxicity, and Drug resistance is a significant barrier to successful cancer treatment. With the development of nanotechnology, the study of cancer treatment has undergone a revolution. For treatment of cancer Nanoparticles can be used because of their...
Topics: Cellular targeting, Chemotherapy, Cryosurgery, Multidrug resistance, Nanoparticles
Community Texts
Feb 21, 2023 Satish Kumar Yadav, Santosh Kumar
texts

eye 0

favorite 0

comment 0

Renewable energy has gained popularity due to depleting natural resources and escalating fossil fuel and nuclear pollution. Power electronic engineers design grid-connected power conversion systems. MLIs provide more power and solutions. Cascaded H-Bridge (CHB) MLIs start with two or more 3L single-phase H-bridge inverters. Each H-bridge may produce three separate voltage levels. Combining the separated dc voltage sources produces a stepped output voltage with a step size equal to the magnitude...
Topics: Decision Tree, Discrete Wavelet transform, Seven level Cascaded H-Bridge Inverter, Switch fault,...
Community Texts
Feb 21, 2023 Abhishek Dixit, Santosh Kumar
texts

eye 0

favorite 0

comment 0

Micro grids have become popular as a way to reduce carbon emissions and use nonrenewable energy sources to produce power. Microgrids allow users to generate and regulate energy as needed, reducing their reliance on the utility grid. They may also sell excess electricity to the grid and make money. Due to its simple design, fast installation, and easy maintenance, photovoltaic systems are a vital microgrid resource. Microgrids threaten the reliability and optimum functioning of major power...
Topics: Classification, Ensemble classifier, Fault detection and categorization, Machine Learning,...
Community Texts
Feb 21, 2023 Priya Parameswarappa
texts

eye 0

favorite 0

comment 0

This work describes a functional, generic, broad-scoped investigative methodology for Windows memory analysis. The methodology applies equally to functional and damaged, or corrupted memory images and relies on Volatility. It is based on the author’s various memory analysis case studies. Summing it up succinctly, the methodology aids the forensic practitioner in squeezing the maximum amount of possible evidence from a memory image. The proposed methodology is suitable for analysts at all...
Topics: Cyber security, Memory analysis, Memory forensic, Windows
Community Texts
Feb 21, 2023 Swasti Goyal, Tanya Sharma, Anuj Kumar
texts

eye 0

favorite 0

comment 0

One of the most in demand research topic in today’s technology world is medical area and cancer is one of them. The second main cause of death in the world is cancer. In 2015 about 8.8 million people have died due to cancer. For the early detection of breast cancer several types of research have been done to start the treatment and increase the survivability. Breast cancer affects the women mentally as well as emotionally. The goal of this challenge is to provide a framework that uses a...
Topics: Breast Cancer, KNN, Machine Learning, SVM, Tumor
Community Texts
Feb 21, 2023 Priya Parameswarappa
texts

eye 0

favorite 0

comment 0

Model-based security metrics are an emerging topic of cyber security research that focuses on assessing an information system's risk exposure. We propose an end-to-end solution with the deployment of a zero-trust network utilising Artificial Intelligence in this article to understand the security posture of a system before it is rolled out and as it matures. The major part contains a discussion about the key methods and techniques which was utilized in the development process and simplified...
Topics: Artificial Intelligence, Anomaly detection, network monitoring, Zero Trust Network Access.
Community Texts
Feb 21, 2023 Amrik Singh, Puneet Jain, Ajay Kumar
texts

eye 0

favorite 0

comment 0

Internet-based provision of computer resources is known as cloud computing. It is possible to utilise data that is controlled by a third party or some other individual at a distant place through cloud computing. Service Level Agreements (SLAs) are used by the majority of Cloud providers to define the services they provide. As part of the SLA, the service provider promises a certain level of quality of the service. Computing and data clouds are two sorts of clouds in a cloud-based system. In...
Topics: Cloud Computing, Metaheuristic Algorithms, RAO Algorithm, Task Scheduling
Community Texts
Feb 21, 2023 Franklin Ore-Areche, Kelyn Nataly Muñoz-Alejo, Cledi Puma-Condori
texts

eye 0

favorite 0

comment 0

Nowadays e-commerce and online transaction is growing rapidly. For online and offline transaction most of the customer uses credit card. Credit card used globally for online transaction, buy goods, product, and payment. The rising use of credit card can increase the chances of fraud in credit card. Credit card system is at risk now. The effect of this fraudulent transaction is on the bank and institute causing a financial loss to them. For the detection of distinguish frauds, several machine...
Topics: Credit Card Frauds, Detection of Frauds, Local outlier factor, Machine learning model, Random...
Community Texts
Feb 21, 2023 Jatinder Pal Singh, Arshdeep Singh
texts

eye 0

favorite 0

comment 0

This research work, presents Fuzzy Logic Controller (FLC) based D-STATCOM for power quality (PQ) enhancement in power distribution network. In the power distribution system, PQ is the major issue that is occurring due to non-linearity and dynamic changes in the connected loads. The proposed work utilizes FLC for generating switching Pulses for IGBT switches in the D-STATCOM to enhance quality of power in distribution systems. This research work also shows superior performance over conventional...
Topics: D-STATCOM, Fuzzy Logic Controller, PI controller, Power Quality, Voltage Source Inverter.
Community Texts
Feb 21, 2023 Umang Garg , Neha Gupta, Dr. Mahesh Manchanda
texts

eye 0

favorite 0

comment 0

Cloud computing is delivered as a storage service by third party. It gains wide acceptance from various Business organizations & Information Technology (IT) Industries. Cloud computing provides various services to users through the internet; those services are like Applications, computation, and storage etc. In spite of these advantages, cloud technology faces different types of privacy and security related issues. These issues become major barriers to adopt cloud technology into various...
Topics: Attacks, Cloud Architecture, Cloud Computing, Cloud Services, Privacy, Privacy Issues and...
Community Texts
Feb 21, 2023 Vseem Zahir, Puneet Jain
texts

eye 0

favorite 0

comment 0

Maximum power point tracking (MPPT) techniques are considered a crucial part in photovoltaic system design to maximise the output power of a photovoltaic array. PID controllers are deployed in the photovoltaic system to track the maximum power point. The performance of the PID controller is influence by controlling parameters. In this paper, we have calculated the optimal parameter values of PID controller using the hybrid combination of GA-PSO algorithm. The proposed method Simulink is...
Topics: Genetic Algorithm, MPPT, Particle Swarm Optimization, Photovoltaic System, PID Controller.
Community Texts
Feb 21, 2023 Mukesh Kumar, Puneet Jain, Ajay Kumar
texts

eye 0

favorite 0

comment 0

Users' electricity use may be shared nearly instantly with utilities companies on the smart grid due to Smart Meters (SMs). The data is communicated between individuals in the company, which has prompted privacy issues. In this paper, a privacy-preserving method for smart meter data is designed using a swarm intelligence algorithm. In the swarm intelligence algorithm, JAYA algorithm is taken under consideration and deployed for key generation in the planned method. After that, an XOR operation...
Topics: Encryption, JAYA Algorithm, Privacy-Preserving Method, Security, Smart Grid, Smart Meter, Swarm...
Community Texts
Feb 21, 2023 Inderjeet Singh, Sarabjeet Kaur
texts

eye 0

favorite 0

comment 0

The most important aspect of all forms of confidential communication is security. Although cryptography can be used to safeguard information, it also reveals the presence of covert communication. As a result, steganography, the art of secret communication, was devised. Steganography conceals the presence of covert communication by putting the secret information in a cover image. The inserting process generates the variability in the cover image that negatively impact the imperceptibility...
Topics: Bumble Bee Optimization Algorithm, Imperceptibility, Image Steganography, LSB, Security.
Community Texts
Feb 21, 2023 Palwinder Singh, Manpreet Kaur, Dr. Naveen Dhillon
texts

eye 0

favorite 0

comment 0

For photovoltaic systems to be more efficient, maximum power point (MPP) tracking of the solar arrays is necessary. The output power of solar arrays is influenced by two factors: temperature and solar irradiation. It is also possible that a traditional MPP tracker would operate incorrectly because to the mismatch effect produced by partial shadow. There are many maximum values for the solar array power–current characteristics when it is partly shaded. For PV systems in partly shadowed...
Topics: Chaotic Map, Particle Swarm Optimization, Renewable Energy Source, Solar System.
Community Texts
Feb 21, 2023 Aaradhna Soni
texts

eye 0

favorite 0

comment 0

The proposed work implements a 8 bit controller based multi-storey car parking system. This work aimed to make the current vehicle parking technique increasingly advantageous, easy to use, programmed and least human mediation. The central part of this system is a 8 bit microcontroller which takes care of parking and exit of vehicles. There are totally 3 floors (floor 0, 1 and 2) each containing 8 slots (slot 0 to slot 7) for parking of cars. Cars are carried to the available free slots in any...
Topics: Sensors, slots, automation, GSM.
Community Texts
Feb 21, 2023 Vivek Vishnu, Vineet Kumar Dwivedi
texts

eye 0

favorite 0

comment 0

The thesis proposes a method for introducing lean manufacturing using string diagram in an operating CNG high pressure storage tank manufacturing job shop at Jayfe Cylinder Ltd. Haryana. By applying lean manufacturing using process layout diagram to produce part families with similar manufacturing processes and stable demand, plants expect to reduce costs and lead-times and improve quality and delivery performance. The thesis outlines a method for assessing, designing, and implementing lean...
Topics: CNG, Lean manufacturing method, High pressure tanks
Community Texts
Feb 18, 2023 Shweta Kushwaha, R. K. Yadav
texts

eye 3

favorite 0

comment 0

For safe and economic design of structures to be constructed in expansive soils study of swelling properties is  an important prerequisite. The volume change in swelling soils are the cause of many problems in structures that come  into their contact. The laboratory test method for finding swelling pressure of any soil is time consuming and expensive. ...
Topics: Swelling Pressure, Coefficient of correlation (R2 ), MLRA, Regression, SLRA
Community Texts
Feb 18, 2023 Shweta Kushwaha, R. K. Yadav
texts

eye 2

favorite 0

comment 0

Expansive soil have tendency to change significantly in volume with variation in water content. The volume  change in such soils causes considerable damage in structures that come into their contact. For safe and economic design  of  structures  to  be  constructed  in  expansive  soils  study  of  swelling  properties  is  an  important  prerequisite.  Assessing ...
Topics: Swelling Pressure, Coefficient of correlation (R2 ), MLRA, Regression, SLRA
Community Texts
Feb 18, 2023 Prashant Rajotia, Dr. Deepika Masand
texts

eye 3

favorite 0

comment 0

In this paper power system stability improvement of multi machine system by using STATCOM is investigated.  MATLAB  simulation  indicates  STATCOM  improves  transient  stability  of  a  system  and  compensate  reactive  power  in  steady state .transient stability improvement of multi machine power system at different fault condition is investigates ...
Topics: STATCOM, FACTS, MATLAB/SIMULINK, POWER SYSTEM STABILITY
Community Texts
Feb 18, 2023 Shikha Tiwari, Hari Shanker Srivastava
texts

eye 2

favorite 0

comment 0

This paper design a new architecture for a 8 bit   Binary to BCD (BD) converter which forms the core of our  Proposed  high  speed  high  performance  and  low  power    decimal Multi‐operand  Adder. It  is intend  to    design  that  contains various improvements ended existing architectures. These include an improved BD Converter that helps in  reducing  the  delay  reducing  area  of  the  Multi‐operand  decimal  Adder. ...
Topics: Carry Save Adder, BCD, Ripple Carry Adder.
Community Texts
Feb 18, 2023 Reena Singh, Pallavi Bondriya, Mitali Kushwaha
texts

eye 2

favorite 0

comment 0

This  paper  provides  various  applications  and  comparison  of  facts  devices. Facts  devices  are  basically  used in  transmission lines to regulate the reactive power balance in the transmission network. Facts devices can be classified on  the basis of their control strategy either as series or shunt compensators. In this paper a brief description about various  facts devices is given. 
Topics: Facts devices, Shunt and Series Compensation.
Community Texts
Feb 18, 2023 Reena Singh, Pallavi Bondriya
texts

eye 2

favorite 0

comment 0

Due to the increasing demand of electricity the quantity of nonlinear load also get increased. Hence due to the  increase in  non‐linear load it is  being  difficult  to maintain  the  stability  and  security  of  the  power  system. In  order  to  overcome from this difficulty a new approach fuzzy logic with UPFC is used in this paper. This intelligent control system is  applied  which  enhances  the  transmission  system. ...
Topics: FLC Controller, Flexible AC Transmission System, UPFC, Mamdani Interface, STATCOM.
Community Texts
Feb 18, 2023 Murli Manohar, Ran Vijay Singh Sengar
texts

eye 2

favorite 0

comment 0

As  the  power  demand  increasing  day  by  day,  the  power  failure  is  also  increasing.  So,  the  renewable  energy can be used to provide constant loads. To convert the basic circuit equation of solar cell into simplified form, a  model is developed including the effects of changing solar irradiation and temperature. Maximum power point tracker ...
Topics: Buck Boost Converter MPPT, P&O, PV
Community Texts
Feb 18, 2023 Lakhan Kumar, Dr. Ajay Kumar Kaviti
texts

eye 2

favorite 0

comment 0

The  renewable  energy  sources  such  as  solar,  wind,  bio‐mass,  and  geo‐thermal  are  environment  friendly  and  perennial  in  nature.  The  harnessing  of  energy  through  these  resources,  using  efficient  technologies,  is  expected to play an important  role in serving a clean source  for  the human being. Water is very important  for human ...
Topics: Minimum depth, Transmittance variation, Incidence angle variation, Distillation, Purification of...
Miscellaneous Contributed Journals and Academic Newsletters
Feb 18, 2023 Balwant Barkhaniya, Madhu Upadhyay
texts

eye 4

favorite 0

comment 0

Power quality issues is a key issue in recent time where mainly the disturbances like voltage sag,  voltage swell and faults are the mail causes. In this paper Dynamic Voltage Restorer (DVR) is implemented  to  mitigate  the  vulgate  sag,  swell  and  faulty  disturbances.  A  dynamic  voltage  restorer  (DVR)  is  a custom power tool used  to correct  the  voltage  sag  by  voltage  as  well  as  power  injection.  The  DVR ...
Topics: Flexible AC Transmission System, Electrical Power Quality, Voltage Sag, Voltage swell
Community Texts
Feb 18, 2023 Mohammad Faraz Rayeen, Arun Singh Patel
texts

eye 1

favorite 0

comment 0

Producing  better  quality,  reducing  the  manufacturing  cost  and  delivering  the  product  quickly,  have  now  become  the major  targets  for manufacturing  industry.  FE  simulation  can  play  an  important  role  in  the  integration  of  design  and  manufacture  during  the  development  of  automobile  parts.  FEA  model  has  been  generated  for  different  chassis  parts  with  the  specified  quality  criteria  and ...
Topics: Automotive CATIA, Chasis, Design, FEA
Community Texts
Feb 18, 2023 Balwant Barkhaniya, Madhu Upadhyay
texts

eye 2

favorite 0

comment 0

Dynamic Voltage Restorer (DVR) is a modern  and  key  custom  power  device  to  maintain  the  power  quality. The DVR is a series compensator implemented  to mitigate voltage sags and swell and to restore load  voltage  to  its  rated  value.  The  Dynamic  Voltage  Restorer  (DVR)  is  of  high  dynamic  response,  flexible  and efficient solution to voltage sag and swell problem ...
Topics: Dynamic Voltage Restorer, Power Quality, Voltage Sag, Voltage swell
Community Texts
Feb 18, 2023 Ashish Vijayvargiya
texts

eye 2

favorite 0

comment 0

Congestion management  is  a major  challenge  in  front of  system operators particularly in deregulated  system.  Now  a  day’s  power  system  is  undergoing  the  process  of  deregulation  everywhere  to  fulfill  the  increased demand, by inducing competition in electricity  market  and  for  the  better  utilization  of  distributed  generating  units.  Various  conventional  and  latest  optimization  techniques  like  nonlinear ...
Topics: Congestion management, Genetic Algorithm, Optimization
Community Texts
Feb 18, 2023 Aftab Ahmed Ansari, Akansha Mercy Steele , Dr. K.T. Chaturvedi
texts

eye 2

favorite 0

comment 0

Induction motor drives are commonly used for applications with vast variations in mechanical load for torques under nominal values. The most ideal scheme for induction motor drive design should include drive loss reduction, or efficiency improvement, proportional to load torque such that optimal performance of drive is not affected. Induction motors have good efficiencies when operating at full load. However, at lower than rated loads, which is a condition that many machines experience for...
Topics: Fuzzy logic, Loss minimization, Efficiency optimization, Induction motor drive.
Community Texts
Feb 18, 2023 Saandeep Patil, Naveen Asati
texts

eye 2

favorite 0

comment 0

In deregulated period of power system, load characteristics become more erratic. Unplanned transactions of electrical power through transmission lines of particular path may occur due to low cost offered by generating companies. As a consequence those lines driven close to their operating limits and becomes congested as the lines are originally designed for traditional vertically integrated structure of power system. This congestion in transmission lines is unpredictable with deterministic load...
Topics: Electricity Market, Generator sensitivities, Genetic Algorithm, Rescheduling, Transmission...
Community Texts
Feb 18, 2023 Ashish Tripathi, Arun Singh Patel
texts

eye 3

favorite 0

comment 0

Jigs and fixtures are the special production tools which make the standard machine tool, more versatile to work as specialized machine tools. They are normally used in large scale production by semi-skilled operators; however they are also used in small scale production by when interchangeability is important. Various areas related to design of fixture are already been very well described by various renowned authors, but there is a need to couple and apply all these research works to an...
Topics: Jigs, Fixture, Functional Requirement, Flexible fixture controlsystem
Community Texts
Feb 18, 2023 Rashmi Singh, Kausal Sen
texts

eye 2

favorite 0

comment 0

Deregulation  of  the  electricity  sector  has  brought  the  benefits  of  supplying    electricity  at  lower  rates,  better  service  quality  and  large‐volume  electricity  trade  can  be  conducted  cross‐border  in  the  competitive  electricity  markets.  But  such  large  electricity  trade may cause large‐scale  transmission of  electric  power  across  regions  where  the  unexpected  power  flows  may  push  electricity ...
Topics: PSO, Transmission, Overload Alleviation
Community Texts
Feb 18, 2023 Rashmi Singh, Kausal Sen
texts

eye 2

favorite 0

comment 0

Transmission lines in Electric Power System  are  becoming  heavily  loaded  and  will  further  affect  system  stability.  With  rapid  growth  of  electricity  market  trades  and  the  availability  of  insufficient  transmission  resources  leads  to  network  congestion.  Real‐time  transmission  congestion  is  defined  as  the  operating  condition  in  which  there  is  not  enough  transmission  capability  to  execute  all ...
Topics: PSO, Transmission, Overload Alleviation
Community Texts
Feb 18, 2023 Pratiksha Mishra, Hemant Malha
texts

eye 2

favorite 0

comment 0

Flexible AC Transmission Systems (FACTS) Controllers are used to increase transmission capacity by damping the power system oscillations and regulating the bus voltage at which the Static Compensator is connected. The focus in this paper is to describe the use of Fuzzy Logic Controller with STATCOM Controllers and compare them in static voltage stability improvements for the damping of the IEEE 14 Bus power system oscillations. A Single line diagram of the IEEE 14 Bus standard system is used in...
Topics: IEEE 14 bus System, Fuzzy Logic Controller, STATCOM Technology, MATLAB Simulink
Community Texts
Feb 18, 2023 Nagendra Singh, Priyanka Mishra
texts

eye 1

favorite 0

comment 0

Presently, the efficient supply chain is one of the vital issues in the industrial management perspective. In today’s world that is confronted with rapid technological changes and high competitiveness, companies are more successful that respond to the customers’ needs effectively, regarding the existing opportunities and threats. As a supply chain comprises of various organizations, it can assure customers needs, only when the whole of its parties become incorporated and coordinated. The...
Topics: SCM- Supply Chain Management, Cost of Sales, Cost of Service, Customer Service, Customer Service...
Community Texts
Feb 18, 2023 Nagendra Singh, Priyanka Mishra
texts

eye 2

favorite 0

comment 0

Economic load dispatch is one of the primary  functions  of  power  system management. The  objective  of  economic  load  dispatch  is  to  minimize  the  fuel  cost  while  maintaining  the  required  Constraints  of  power  system. Economic  Load Dispatch  is  a  commonly  known  challenge  in  front  of  power  system  operators  and  a  major  concern  for  researchers  and  industrialists  across ...
Topics: ELD, Genetic Algorithm, PSO
Community Texts
Feb 18, 2023 Surabhi Girare, Vaibhav Patel, Anurag Shrivastava
texts

eye 2

favorite 0

comment 0

Prediction of Bankruptcy is the most important task. The techniques to assist fraud investigators, for banks and other financial organizations, rely on machine learning algorithms. Proposing a predictive model for Fraud determination is however mainly exigent due to the highly distributed data and the availability of only few transactions labeled as fraud in overall transactions. To seek out whether the transaction is fraud on E-commerce websites, is role of prediction models. To find out such...
Topics: Bankruptcy, Bankruptcy Prediction, Ecommerce, Machine Learning, Financial Organization,...
Community Texts
Feb 18, 2023 Surabhi Girare, Vaibhav Patel, Anurag Shrivastava
texts

eye 2

favorite 0

comment 0

Prediction of Bankruptcy is the most important task. The techniques to assist fraud investigators, for efficient Credit Card Fraud Detection (CCFD), rely on machine learning algorithms. Proposing a predictive model for Credit Card Fraud determination is however mainly exigent due to the highly distributed and imbalanced data and the availability of only few transactions labeled as fraud in overall transactions. To seek out whether the transaction is fraud on E-commerce websites, is role of...
Topics: Bankruptcy, Credit Card Fraud Detection, Ecommerce, Machine Learning, Financial Organization,...
Community Texts
Feb 18, 2023 Sourav Ranjan, Vaibhav Patel, Anurag Srivastava
texts

eye 3

favorite 0

comment 0

In India and all over the world chronic kidney disease (CKD) is an increasing and serious disease impacting public health. The symptoms of CKD are often appearing too late and many patients inevitably face pain and expensive medical treatments. The ultimate treatment is frequent dialysis or Kidney transplant. Early detection of disease through symptoms can prevent the disease progression by referral to appropriate health care services. Now days, Machine Learning (ML) techniques have been widely...
Topics: — Boosted Decision Tree, Deep Support vector machine, Chronic Kidney Disease (CKD), Data...
Community Texts
Feb 18, 2023 Swati Patel, Anurag Srivastava, Anand Motwani
texts

eye 2

favorite 0

comment 0

The models or techniques to assist fraud investigators, for efficient Credit Card Fraud Detection (CCFD), rely on machine learning algorithms. Proposing a predictive model for Credit Card Fraud determination is however mainly exigent due to the highly distributed and imbalanced data and the availability of only few transactions labelled as fraud in overall transactions. To seek out whether the transaction is fraud on E-commerce websites, is role of prediction models. To find out such...
Topics: Credit Card Fraud Detection, E-commerce, Predictive Model, Machine Learning, Financial...
Community Texts
Feb 18, 2023 Prabhat Kumar, Arun Patel
texts

eye 3

favorite 0

comment 0

Optimal setting up of injection molding process variables plays a very important role in controlling the quality of the injection molded products. It is all the most important to control attribute defects like sink marks. Sink marks are basically a “designed in” problem and hence it is to be attended during designs stages. Owing to certain conditions and constraints, sometimes, it is rather ignored during design stages and it is expected to be handled by molders with only instruction to...
Topics: Sink mark, plastic injection molding, Taguchi optimization, process optimization, attribute defects...
Community Texts
Feb 18, 2023 Prabhat Kumar, Arun Patel
texts

eye 1

favorite 0

comment 0

: Injection molding is one of the very widely used manufacturing process for polymer materials due to its high production rate and low process cost. However, polymer parts manufactured through injection molding process are prone to various defects such as geometrical defect, shape related defect and visual defects. All designers work hard to minimize these defects and increase the quality of the molded part to satisfy the end application through the molding process parameters optimization with...
Topics: : Injection molding, polymer gears, shrinkage, Taguchi optimization, ANOVA method.
Community Texts
Feb 18, 2023 Amit Sharma, Dr. Yogesh Agrawal
texts

eye 2

favorite 0

comment 0

- India is one of the largest producers of groundnut in the world. About 7.5 million hectares is put under it annually and the production is about 6 million tonnes. Groundnut kernels are used mostly for producing cooking oil in addition to using them in the form of snacks. The groundnut crop after drying has pods, which need to be shelled for taking the kernel out and it is the kernel of groundnut which is used for human consumption. Decortication involves breaking of shells and removal of...
Topics: Manual groundnut decorticator, manufacturing
Community Texts
Feb 18, 2023 Kuldeep Shukla, Praneet Khare
texts

eye 2

favorite 0

comment 0

Database are becoming quick and ending up more perplexing in the volume (terabyte to petabyte), assortment (organized, un-organized and mixture), and speed (rapid in development). Administration of database (Big Data, so terminology) has turned into the worldwide test. The information gathering is as of now oversaw and misused generally by utilizing regular information administration devices, for example, great social database administration frameworks (RDBMS) or customary web crawlers. These...
Topics: - SQL, NoSQL, Database, MySQL, MongoDB, Big Data
Community Texts
Feb 18, 2023 Pradeep Vishwakarma, Arun Singh Patel
texts

eye 1

favorite 0

comment 0

The general aim of this project was to get a better understanding of the physical behaviour of the flow field past wind turbine rotors, including the boundary layer flow as well as the wake region. Although CFD is not a practical design tool, useful suggestions for classical design methods can be derived fromthe analysis. A design method with reference to modeling in Uni-graphics and proceeded by simulation by using CFD (Computational Fluid Dynamics) Star CCM+ program is chosen for current...
Topics: Wind energy, wind turbine aerodynamics, CFD–RANS, blade design, wakes.
Community Texts
Feb 18, 2023 Pradeep Vishwakarma, Arun Singh Patel
texts

eye 1

favorite 0

comment 0

—Energy of wind can be economically used to generate electrical energy Wind can also be used to provide mechanical power such as for water pumping. In India generally wind speeds obtainable are in the lower ranges. Therefore, attempts are on the development of low cost, low speed mills for irrigation of small and marginal farms for providing drinking water in rural area. This paper deals with the analysis and power performance of horizontal axis wind turbine on NREL S807 blade rotor and new...
Topics: Renewable energy, wind rotor, Horizontal axis wind turbines (HAWT), Wind Energy
Miscellaneous Contributed Journals and Academic Newsletters
Feb 18, 2023 Rahul Chourasiya, Vaibhav Patel, Anurag Shrivastava
texts

eye 1

favorite 0

comment 0

Security of valuable information is always a very essential issue for modern digital world. Intrusion Detection System (IDS) and many security techniques is widely used against cyber attacks. Data mining and machine learning methods have also been used by researchers to obtain high detection rate and low false alarm rate. Proposed work aims to design and development of an approach for improve cyber attack detection system using cloud. Uses of cloud computing is increases very progressively....
Topics: Cloud Computing, Cyber Attack, IDS, Classification, Machine Learning, Microsoft Azure Cloud
Community Texts
Feb 18, 2023 Nitesh Kumar, Deepak Kourav
texts

eye 1

favorite 0

comment 0

— Digital image processing a broad field in engineering and technology. In today’s life depends on the applications of digital image processing. In this paper we have review the previous work done in the field of digital image processing. We have basically focused on wavelet transform and contourlet transform. Wavelet transform is a two dimensional transform that can be used as continuous and discrete form of wavelet. In this work we have observe that Contour-let transform is a new...
Topics: Localization, Directional Filter bank
Community Texts
Feb 18, 2023 Atul Shrivastava, Arun Patel
texts

eye 2

favorite 0

comment 0

Valves for hydro power projects are fitted for safety, servicing and repair, and stop flow of water, as well as for flow and variation in pressure. A Valve used in hydel power plant is known as Butterfly valve and is a type of flow control device; it is widely used to regulate a fluid flowing through a section of pipe. This type of valve is mainly used as safety valve, turbine inlet valve, and pump valve for low to medium pressures. They are hydraulic systems and operated by oil for opening and...
Topics: ANSYS, CAD, finite element method (FEM)
Community Texts
Feb 18, 2023 Manish Pawar, Punam Kumar
texts

eye 2

favorite 0

comment 0

Solar energy is a valuable form of energy which has the potential to meet a significant proportion of the world's energy needs. In India it is of much importance as summers are predominant for the major part of the year. In some parts of Rajhastan, it has been found out that atmospheric temperature reaches about 48o C and most part of the country above 40o C . In Rajasthan as ambient temperature reaches above 400 C, temperature of solar panel reaches to 800 C. The solar panels available in...
Topics: Open circuit voltage, short circuit current, fill factor, phase change material, photovoltaic...
Miscellaneous Contributed Journals and Academic Newsletters
Feb 18, 2023 Jitendra Malviya, Vaibhav Patel, Anurag Srivastava
texts

eye 1

favorite 0

comment 0

- Information security is becoming a more important issue for modern computer system, progressively. Intrusion Detection System (IDS) as the main security defensive technique is widely used against many category of attacks. IDS are used to detect various kinds of attacks in very large data. Data mining and machine learning technology have applied in intrusion detection systems. Many machine learning methods have also been introduced by researcher recently to obtain high correctness and...
Topics: Naïve Bayes, New naïve bayes, machine learning technique, IDS, Classification.
Community Texts
Feb 18, 2023 Manish Pawar, Prof. Surendra Agarwal
texts

eye 1

favorite 0

comment 0

A solar photovoltaic system is a device which converts energy from the sun directly into electricity. The solar PV module’s power output strongly depends upon the solar irradiation falling on it. As the intensity of solar radiation decreases, the power of the module decreases almost linearly as the solar irradiation available throughout the day is not constant. A valuable amount of solar radiation falling on photovoltaic system gets converted into heat hence reducing the efficiency of the...
Topics: Photovoltaic cooling, Phase change material, Fill factor, open circuit current, short circuit...
Community Texts
Feb 18, 2023 Surendra Singh, Arun Singh Patel
texts

eye 1

favorite 0

comment 0

An integrated gasification combined cycle (IGCC) is a technology that turns coal into gas synthesis gas (syngas). It then removes impurities from the coal gas before it is combusted and attempts to turn any pollutants into re-usable byproducts. This results in lower emissions of sulfur dioxide, particulates, and mercury. Excess heat from the primary combustion and generation is then passed to a steam cycle, similarly to a combined cycle gas turbine. This then also results in improved efficiency...
Topics: Gasification, pre-combustion, emission syngas combined cycle
Community Texts
Feb 18, 2023 Surendra Singh, Arun Singh Patel
texts

eye 1

favorite 0

comment 0

Internal combustion engine is consist of a very important part piston which is made up of Aluminium alloy. In internal combustion engine during combustion very high temperature and pressure is there inside the cylinder which piston has to bear range of temperature is 6000 c-20000 c and pressure is upto 50 bar .Due to high temperature and pressure high thermal and high structural force per unit area in the piston is produced inside the engine cylinder and if these force per unit area exceeds the...
Topics: CIC, Combustion, Piston
Community Texts
Feb 18, 2023 Apsad Ali, Dr.S.K.Nagpure, Jyoti Mishra
texts

eye 2

favorite 0

comment 0

In This study, designed and developed a photovoltaic/thermal (PV/T) system, which produce electricity and heat (hot water) simultaneously. All Experiments are conducted inside room to check the influence of the temperature of the PV cell on the PV conversion efficiency. If the open circuit voltage of photovoltaic cell is reduced then conversion efficiency of the cell can be reduced at higher working temperatures. effect of these on the photovoltaic cell as extended payback period of the...
Topics: solar energy, corrugated poly carbonate sheet, phase change material, Taguchi method, grey...
Miscellaneous Contributed Journals and Academic Newsletters
Feb 18, 2023 Rajshri Pohekari, Vaibhav Patel, Anurag Shrivastava
texts

eye 2

favorite 0

comment 0

Information security is always a very important issue for modern computer world. Intrusion Detection System (IDS) as the security technique and is widely used against intrusions. Researchers use Data Mining and Machine learning techniques in intrusion detection research area. Many machine learning methods have also been useful to obtain high detection rate and low false alarm rate. This work aims in design and development of an approach for boost cyber attack detection system using cloud. Uses...
Topics: Attack Detection, IDS, Classification, Machine Learning, Microsoft Azure Cloud, Cloud Computing.
Community Texts
Feb 18, 2023 Anurag Shrivastava, Jyoti Sondhi, Sunita Ahirwar
texts

eye 1

favorite 0

comment 0

This research work aims in design and development of an approach for boost cyber attack detection. Growth of information system is increase the data size and attention of intruders now days. Intrusion Detection System (IDS) as the security technique and is widely used against intrusion. Researchers use Data Mining and Machine learning techniques intrusion detection research area. Recently, many machine learning methods have also been useful to obtain high detection rate and low false alarm...
Topics: —Cyber attack, Classification, Machine learning technique, NSL KDD Dataset.
Community Texts
Feb 18, 2023 Mirza Faizan Baig, Hitesh Lade
texts

eye 3

favorite 0

comment 0

It is a big challenge to maintain a good power factor while working in industrial and domestic applications as well, since most of the loads are inductive which tend to make power factor more lagging. To remedy this situation many solutions are available, out of which boost converters are studied and analyzed in the upcoming work. There are various topologies of the boost converters which improve the power factor. This paper covers phase shifted bridgeless boost converter and interleaved boost...
Topics: Converter, Current, THD
Miscellaneous Contributed Journals and Academic Newsletters
Feb 18, 2023 Babita Patel, Anurag Shrivastava, Jyoti Sondhi
texts

eye 2

favorite 0

comment 0

Growth and popularization of information system increase now days, security of information is a big problems. Intrusion Detection System (IDS) as the main security defensive technique and is widely used against intrusion. Data Mining and Machine Learning techniques proved useful and attracted increasing attention in the network intrusion detection research area. Recently, many machine learning methods have also been applied by researchers, to obtain high uncovering rate and low false alarm rate...
Topics: Class Balancing, Sampling, Classification, Machine learning technique, IDS.
Miscellaneous Contributed Journals and Academic Newsletters
Feb 18, 2023 Anurag Shrivastava, Jyoti Sondhi, Sadaf Khan
texts

eye 1

favorite 0

comment 0

—Use of internet is increasing progressively, so that large amount of data and it security is also an issue. IDS (Intrusion detection system) are main defending technique. Sampling technique is one the solution of large dataset. This work proposes a sampling technique for obtaining the sampled data. Sampled dataset represent the whole dataset with proper class balancing. The purpose of this paper is to propose classification framework based on different model. This model also based on machine...
Topics: IDS, Sampling, Classification, Machine learning technique, NSL KDD Dataset
Community Texts
Feb 18, 2023 Anurag Shrivastava, Jyoti Sondhi, Bharat Kumar
texts

eye 2

favorite 0

comment 0

Rapid growth of online shopping and marketing increase the field of e-commerce, which got boosted rapidly with the application of machine learning. Machine Learning (ML) has empowered businesses by finding useful patterns from customers’ search patterns and buying behaviours on web. Predictive analytics based on machine learning can enhance sale probability and find customer churn by analyzing customers past click-through behaviour, purchases, and history in real time. Applying popular the...
Topics: E-commerce, Classification, Big Data, Machine Learning, Microsoft Azure Cloud, Cloud Computing
Community Texts
Feb 18, 2023 Ritika Joshi, Deepak Kourav
texts

eye 2

favorite 0

comment 0

In this paper planned technique depends on identifying the key characteristic of a number plate the concentration of characters with robust light-on-dark edges. The system that reads number plates from any digital image, color or monochrome, sizes vary from 640×480 to megapixel pictures there are 3 major steps to number plate reading. Locating and isolating the number plates within the image, Locating and isolating the characters within the number plate, Reading the characters (OCR, optical...
Topics: Genetic algorithms, image processing, image representations, license plate detection, Machine...
Community Texts
Feb 18, 2023 Anurag Shrivastava Jyoti Sondhi, Pooja Mukhariya
texts

eye 2

favorite 0

comment 0

However, the complexity involved in incoming load to the cloud and the limited availability and characteristics of the resources in the cloud needs some well-designed resource management system to efficiently utilize the resources, without any latency or lag. In this paper we are presenting an effective Virtual machines (VMs) controlling and load distribution algorithm for cloud computing. The proposed technique ensures power saving without producing delay. The proposed work is validated by...
Topics: Cloud Computing, Load Balancing, Clustering.
Community Texts
Feb 18, 2023 Mukesh Kumar Mishra, Anurag Kulshrestha
texts

eye 1

favorite 0

comment 0

With the advancement in technology the power consumption is rising steadily. This necessitates that in addition to the existing source of power such as coal, water, petroleum etc. Other sources of energy should be searched out and new and more efficient ways of producing energy should be devised. Power generation from biomass becomes attractive way for energy generation due to their high energy potential and less pollutants. This study reviews the estimation of power generation potential of...
Topics: Biomass, Power generation, Coal-Biomass, Biomass energy
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Deepa Singh, Laxman Solankee
texts

eye 1

favorite 0

comment 0

 Photovoltaic (PV) systems have received a lot of attention in recent decades due to their accessibility and advancements in PV technology. The protection of PV systems from faults such as String to String (SS), String to Ground (SG), Open circuit (OC), and partial shading are the key challenges to the realization of cost-effective and environmentally friendly PV systems. Such unusual circumstances reduce the maximum available PV power. Partial shading and breakdowns in a PV array must...
Topics: Microgrid, Grid-connected Photovoltaic System, Protection Devices, Machine Learning, Partial...
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Kamal Bhan Singh, Yogesh Mishra
texts

eye 3

favorite 0

comment 0

In the current scenario, wind turbine energy accounts for 70% of total renewable energy used in India. The Indian wind energy sector has a capacity of 20 GW installed (as on 31.5.2017). In terms of installed wind power capacity, India ranks fifth in the world and is regarded as a major player in the global wind energy market. For the current work, a design method based on modelling in Uni-graphics and followed by simulation using the CFD (Computational Fluid Dynamics) star ccm + programme is...
Topics: Aerofoil, CFD, CATIA, Design, Wind Turbine I
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Paresh Korde, Dr. Shailendra Dwivedi
texts

eye 1

favorite 0

comment 0

 An air diffuser while placing in an indoor office space has been the most important consideration for human thermal comfort.To obtain a maximum thermal comfort in an open indoor space the velocity of air and swirl produced by diffuser also has a huge impact.In this thesis we have worked to obtain a better temperature distributed in an indoor space as well as to get a better effect of swirl. We have observed the performance of placing a ceiling swirl diffuser by placing it on a diffuser angle...
Topics: Air Conditioning, Ceiling Swirl Diffuser, Air Distribution System, Indoor
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 W. Kahlon, Lucas Brown
texts

eye 2

favorite 0

comment 0

MANET is one of self-configuring fastest emerging, technology, due to commencement of economical, small & more powerful wireless devices. It is being used in most of applications, ranging from military to civilian, where each node acts as router. To facilitate communication in ADHOC network, a routing protocol is vital whose primary goal is to establish accurate & efficient route between pair of nodes, due to this lot of routing protocols have been proposed for MANET & its success...
Topics: MANET, Ad-Hoc networks, Sinkhole attack, Router
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Greyson Martin, Liam Tremblay
texts

eye 2

favorite 0

comment 0

We all be familiar with two well-known forms of Carbon which are diamond and graphite. Diamond is a one of the toughest and hard material in the earth. Graphite is well-known as most brittle material. But one thing had changed forever, when two physicists A.K.Geim and K.S. Novoselov had got noble prize for “Graphene”. On the basis of his research work published title” The rise of Graphene”. His work shows that Graphene is 200 times stronger than cast iron. It have so many desirable...
Topics: Carbon, Graphite, 2 –Dimensional, Honey Comb Structure, Single Layer
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Jaswant Gupta, Kapil Gupta
texts

eye 2

favorite 0

comment 0

As per regulation of Public Safety Standards of the Republic of India Transport Engineering regarding automotive vehicle brake lining material Part I and part II Specification and material and their range is made available under IS 2772 to the public under the provisions of the Bureau of Indian Standards Act of 1986 and the Right to Information Act of 2005. In order to promote public education and public safety, a better-informed citizenry, the rule of law. In this work rang and material for...
Topics: Filler, Wear, coefficient of friction, Abrasive, Binder, Lubricants, Reinforcement.
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 B. Michael, Diego Serrano
texts

eye 1

favorite 0

comment 0

The enthusiasm for run resources has extended essentially with the presence of present day remote applications. Range sharing, considered as an essential instrument for 5G frameworks, is envisioned to address extend deficiency issue, achieve high data rate get to, and guaranteed Quality of Service (QoS). From the authorized system's point of view, the obstruction caused by all secondary users (SUs) ought to be limited. From optional systems perspective, there is a need to role out systems to...
Topics: QoS, SU, PSO, Neural Network, 5G
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Wong Ye
texts

eye 3

favorite 0

comment 0

 In this paper, an optimized model of Shell and Tube Parallel Flow Heat Exchanger of water and oil type is proposed using C++ programming language. Shell and tube heat exchangers are of special importance in boilers, oil coolers, condensers, pre-heaters etc. They are also used in high pressure operations, refrigeration and air conditioning industry and process applications. In this paper, a number of practical cases of shell and tube heat exchangers are taken and the analysis of thermal and...
Topics: Heat Exchanger, C++, Parallel Flow, Shell and Tube, Pressure drop
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Shan Bahadur, Umang Dayal
texts

eye 2

favorite 0

comment 0

In day today life because of lack energy resources man move towards renewable energy source. When we go towards solar system it can use the sun energy to boil water or to generate electricity. Our aim is to develop a system which uses solar energy in both form thermal and solar form. The Hybrid Solar Solution is able to produce more electricity than PV, more reliable hot water than solar thermal, and heating at a better CoP than most conventional heat pumps - all with little or no CO2...
Topics: RENEWABLE ENERGY, HYBRID SOLAR THERMAL, CoP
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 James Murray
texts

eye 0

favorite 0

comment 0

Event logging and event logs play an important role in modern IT systems criminal investigation which is generated when end user with each other in web environment and stored in various logs like firewall log file at side, network log file at gateway and web log file at server side. But log file is not to be over emphasized as a source of information in systems and network management. Whereas conduct efficient investigation and gathering of use full information need to correlate different log...
Topics: — Event Logging, Fuzzy Logic, Temporal Correlation
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Franklin Oloko, Michael Derrek
texts

eye 3

favorite 0

comment 0

The selection of smart antenna framework is a guarantee to the arrangements of the remote correspondence debilitations like wasteful use of recurrence range, week signal due to multipath engendering, and so on. The keen reception apparatus works in conjunction with advanced flag processor which is dependable to modify different parameters of the framework keeping in mind the end goal to eliminate obstruction signals and to upgrade gathering in the coveted direction(s). In this paper, an...
Topics: Beamforming, smart antenna, Adaptive
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Meena Deshbhratar, Anurag Srivastava
texts

eye 3

favorite 0

comment 0

Network protection in our everyday lives is becoming increasingly critical today. Since we cannot live without the Internet, it is important to have a good and security environment for networking. Cross site scripting (XSS) does, however, attack millions of websites. We can use XSS to insert malicious scripting code into apps and then return it to the customer side. If users are using the web browser to visit the injecting place of the malicious script code, it is directly run on the customer...
Topics: Script Code, Vulnerability Trends, Web Engineering
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Hitesh Yadav, Mahesh Kumar
texts

eye 2

favorite 0

comment 0

India is an energy deficient country, where a large fraction of the population still does not have access to modern day energy services such as electricity. This is due to very limited fossil fuel resources and poor economy, which restrains the import of fossil fuels on a large scale. To overcome energy shortage, India needs to develop its indigenous energy resources like hydropower, solar and wind. India lies in an area of one of the highest solar insulation in the world. Accordingly, the...
Topics: Solar Energy, Solar Cell, Solar Collectors, Solar Electric Power
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Swarnim Tiwari, Kamlesh Dubey
texts

eye 2

favorite 0

comment 0

Solar energy is abundantly available and its use in various applications has always been of great interest among the common man, designer, engineer and researchers. One of the applications among several is in heating of air. Hot air is of use in domestic and industrial purposes. The efficiency of any solar air heater can be understood as the ability of the solar air heater to transfer the heat from the absorber plate where the solar radiations are absorbed to the air flowing over this. Since...
Topics: Artificial Roughness, Absorber Plate, CFD, Heat Transfer, Solar Heater
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Jatin Das, Shyam Malik
texts

eye 2

favorite 0

comment 0

In day today life because of lack energy resources man move towards renewable energy source. When we go towards solar system it can use the sun energy to boil water or to generate electricity. Our aim is to develop a system which uses solar energy in both form thermal and solar form. The Hybrid Solar Solution is able to produce more electricity than PV, more reliable hot water than solar thermal, and heating at a better CoP than most conventional heat pumps - all with little or no CO2...
Topics: RENEWABLE ENERGY, HYBRID SOLAR THERMAL, CoP
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Michael Druz
texts

eye 1

favorite 0

comment 0

Nowadays, the effective supply chain is one of the important issues in the industrial management context. In today's world that is confronted with rapid technological changes and high competitiveness, companies are more successful that respond to the customers' needs effectively, regarding the existing opportunities and threats. Since a supply chain consists of various organizations, it can satisfy customers' needs, only when the whole of its parties become integrated and coordinated.
Topics: Information Sharing, Purchase problems, Supply Chain
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Mamta Narware, Laxman Solankee
texts

eye 2

favorite 0

comment 0

With the emphasis on reducing carbon footprint and promoting the utilization of non renewable resources of energy in production of electricity, the micro grids have emerged as popular arrangement. Micro grids have empowered the users with flexibility in generating & controling electricity as per their requirements and have reduced their dependence on utility grid. Also they can now transfer surplus electrical energy to utility grid and can earn monetary gains. Photovoltaic systems have...
Topics: Microgrid, Detection and Identification, Classification, Fault Diagnosis, Protection System, PV...
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Upendra Kumar Kachhwaha, Anurag Shrivastava
texts

eye 2

favorite 0

comment 0

Banks and financial organizations are really facing the challenge of identifying Threat factors, which should be considered while advancing the loans/credit to customers. An Ensemble ML algorithm is suitable for studying bank credit dataset. In future, we intend to build up a ML system risk automated system over cloud for financial organizations that will incorporate key features to determine credit value of customers. Most methods for credit threat detection require previous data to build and...
Topics: Cloud, Credit threats, Machine Learning
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Aaradhna Soni
texts

eye 3

favorite 0

comment 0

The necessity of soft-starter is increasing day by day to reduce the starting current & to maintain the torque smoothly according to the load requirement. Now intelligent soft-starter is developed to improve the performance of conventional starter. This paper focused on the designing of an artificial neural network controlled soft-starter .Backpropagation algorithm is used as learning algorithm in the artificial neural network. Error correcting capability of this learning algorithm makes it...
Topics: ANN, Soft-starter, back propagation
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Draz Medhat, Ronxguan D.
texts

eye 3

favorite 0

comment 0

Increased awareness towards environmental concern has led towards the efforts made to reduce harmful effects of conventional means of electricity generation on environment and to generate electricity from the renewable energy sources like wind and solar. Generation of electricity from wind energy is associated with the advantage of non-ending wind resource devoid of harmful emission or content in it. The proposed investigation in this paper is aimed to achieve the following objectives Design,...
Topics: Renewable energy, Wind energy system, Induction Generator, WECS, SEIG.
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Avishek Kumar, Manish Sharma
texts

eye 2

favorite 0

comment 0

The present work investigates the numerical simulation of thermal analysis of mixed convection air flow in a CPU Cabinet. The simulation is focused on the non-uniformly heated mother board temperature distribution. In this modern world speed determines everything especially desktop PC, CPU have been popular. The computer revolution is growing rapidly in almost every field. CPU is the electronic components, which produces a lot of heat that reduces the performance. In this study the forced...
Topics: CPU, Heat sink, Heat dissipation, Cooling, ANSYS
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Ravindra Awasthi, Yanbing Zheng
texts

eye 2

favorite 0

comment 0

This work aim is to study of Life Time Prediction of Nylon Rope using Aging Property, Thermal Behavior and Physical Properties In This work taking nylon rope experimental test were performed in ASTM D3045 standard for breaking strength. firstly, in this project the nylon rope samples are keep in heat aging oven at 700 c temperature for 0,1,3,6,12,23 weeks. after the completion, test the material in universal testing machine for breaking strength In the present investigation the Breaking...
Topics: Aging, Life Cycle, Nylon Rope, Physical Properties, Thermal Properties
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Sarvda Nand Tiwari, Rajesh Kumar Jatav, Ranjeet Singh
texts

eye 3

favorite 0

comment 0

Dribble water system at a rate near plant water take-up requires low application rates (microdrip), which influence soil water system and plant reaction. This investigation think about the impact of three producer releases, 0.25, 2.0, and 8.0 L h−1, on various parts of the water system in every day dribble inundated corn (Zea Mays L.), depending on field perceptions and mathematical reenactments. Increasingly more consideration is being centered around saline water usage in water system...
Topics: Drip Irrigation, Water, Solar, Basin
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Sandeep Kumar, Rajesh Kumar Jatav, Ranjeet Singh
texts

eye 2

favorite 0

comment 0

Late years have seen an expansion in worldwide normal air temperatures just as sea temperatures, as archived by the Intergovernmental Panel on Climate Change (IPCC). The ascent in temperature is viewed as obvious proof of environmental change, and this has just begun to have genuine ramifications for water assets and will have considerably more critical results later on. Aggravating these outcomes are populace development, land-use changes and urbanization, expanding requests for water and...
Topics: Climate change, Extreme events, Ecosystem, Water quality, Groundwater
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Amit Kumar, Arun Patel
texts

eye 2

favorite 0

comment 0

The codeposition of micro particles inside an electroplating procedure is a proficient technique to create such improved materials. The particles are utilized to perform explicit mechanical, electrical, piezoelectric or attractive properties in slight coatings. The point of giving a covering to a substrate is to improve a portion of its properties of the substrate or to acquire a totally new property. The composite covering innovation is utilized many assembling regions. Composites are...
Topics: Metal matrix, composite coatings, Material properties, Electrodeposition, Co-deposition, Micro...
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Mamta Narware, Laxman Solankee
texts

eye 2

favorite 0

comment 0

In order to analyze the challenges and solutions provided in the microgrid protection, this paper presents the review of protection algorithms proposed in the literature. The present review work has been oriented to provide the idea of protection strategies adopted in the past and their effectiveness in providing the protection to microgrid with reliability. Various efficient protection approaches have been discussed and compared to examine the effectiveness of them in providing the suitable...
Topics: Microgrid, protection, Machine learning, Feature extraction, Distributed generation
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Shiv Nandan Chourasia, Sunil Shukla, Arun Patel
texts

eye 2

favorite 0

comment 0

A leaf spring is a basic type of spring, generally utilized for the suspension in wheeled vehicles. Leaf Springs are long also, thin plates connected to the edge of a trailer that rest above or beneath the trailer's pivot. There are mono leaf springs, or single-leaf springs, that comprise of basically one plate of spring steel. These are normally thick in the center and tighten out toward the end, and they don't normally offer a lot of solidarity and suspension for towed vehicles. Drivers...
Topics: Solid edge, ANSYS, Leaf Spring, Composite Material
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Ashish Ranjan Bhagwat, Sohail Bux
texts

eye 2

favorite 0

comment 0

The disc brake rotor is a rotating device. Braking is a process which converts the kinetic energy of the vehicle into mechanical energy which must be dissipated in the form of heat. This project presents the analysis of the contact pressure distributions at the disc interfaces using a detailed 3 dimensional finite element model of a real car disc brake rotor . Finite element (FE) models of the brake-disc rotor are created using CATIAV5R20 and simulated using ANSYS 19.2 which is based on the...
Topics: Cast Iron, Aluminium Alloy, Carbon fiber, Stresses, Deformation, CATIA, ANSYS, Disc brake rotor
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Subrat Kumar, Santosh Kumar
texts

eye 1

favorite 1

comment 0

The ability to accurately forecast power generation from renewable sources is nowadays recognized as a fundamental skill to improve the operation of power systems. The performance of the various forecast models are affected by many elements of uncertainties, and in the opinion of the authors it is not always clear how single choices (e.g., the choice of a specific prediction methodology over another) or different factors (e.g., meteorological forecasting errors) contribute to the final...
Topics: PV plants, Machine Learning algorithms, power generation forecasts.
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Upendra Sah, Santosh Kumar
texts

eye 1

favorite 0

comment 0

A PV system converts the solar energy into electrical energy, and this energy is either stored in a battery bank in a standalone system or transmitted to the grid through grid interfacing power electronic converters. PV fault protection/detection and isolation devices of multiple kinds are installed in a PV station to isolate the PV converters/grid from the PV array during any fault in the PV system. Although, the rest of the power processing or storage units are isolated from the faulty PV...
Topics: Photovoltaic system, fault detection, artitifcial intelligence, Probabilistic neural network.
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Raja Kumar, Santosh Kumar
texts

eye 3

favorite 0

comment 0

-In this study Maximum Power Point Tracking (MPPT) is applied to the Photovoltaic (PV) system to harvest the maximum power output. Maximum Power Point Tracker in a Photovoltaic system allows to maximize the energy drawn from the connected photovoltaic modules. In the partial shade conditions there can be more than one maximum point in photovoltaic output power curve. The solution for this situation is a maximum power point tracker algorithm, which finds the global maximum. In literature, there...
Topics: Maximum Power Point Tracking (MPPT), Photovoltaic (PV) System, Global Point(GP)
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Dr. Vinay kumar Chaudhary
texts

eye 3

favorite 0

comment 0

Ergonomics (from the Greek word ergon meaning work, and nomoi meaning natural laws), is the science of enhancing the design of products to optimize them for human use. Human dynamics , such as height, weight, and proportions are taken into consideration , as well as factors such as human hearing, vision, temperature preferences, and so on. Ergonomics is sometimes known as human engineering. In the era of Digital Explosion, Computers and related products, such as computer tables and chairs, are...
Topics: O.H.S., Laborer's, Computers, Ergonomics
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Nidhi Chandel, Uday Ganguly
texts

eye 2

favorite 0

comment 0

Financial depression and then the resultant failure of a business is usually an extremely costly and disrupting event for any company and organization. Statistical predictions of financial depression models try to predict whether a business will experience financial failure in the future. Discriminate analysis and logistic regression have been the most popular approaches which is used, but there is also a large number of data mining and machine learning techniques that can be used for this...
Topics: Bankruptcy, Bankruptcy prediction system
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Md. Abdul Rehman
texts

eye 2

favorite 0

comment 0

Air distribution has major role in increasing the effectiveness of air conditioning. For better air conditioning, not only thermal comfort is satisfactory, but indoor air quality is also very important on considering better human comfort. Human comfort has substantial role in living standard also. In this review paper, author reviewed on different methods of air distribution & their advantage and limitation as well as different parameter which affect indoor air quality & human comfort....
Topics: Air Distribution, Human comfort, indoor air quality, Thermal comfort
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Dr. Brajesh Kumar
texts

eye 1

favorite 0

comment 0

Theory and techniques for improving the handling of different functional issues were implemented in several fields. In view of advancement in computing systems, optimization technologies in different engineering applications have become increasingly relevant and common. Effective management of networks of the supply chain is difficult and a difficulty which is attributed to a high degree of supply-demand ambiguity, dispute priorities, knowledge vagueness, multiple decision variables and...
Topics: Mathematical Modelling, Supply, Flexibility, Measures, Management, Links.
Miscellaneous Contributed Journals and Academic Newsletters
Feb 14, 2023 Ravindra Awasthi , Yanbing Zheng
texts

eye 1

favorite 0

comment 0

- This work aim is to study of Life Time Prediction of Nylon Rope using Aging Property, Thermal Behavior and Physical Properties In This work taking nylon rope experimental test were performed in ASTM D3045 standard for breaking strength. firstly, in this project the nylon rope samples are keep in heat aging oven at 700 c temperature for 0,1,3,6,12,23 weeks. after the completion, test the material in universal testing machine for breaking strength In the present investigation the Breaking...
Topics: Aging, Life Cycle, Nylon Rope, Physical Properties, Thermal Properties